Grate-Tek Engineering. sunshine coast grate specialists

Recessed Driveway & Stormwater Grates.

These grates slip into a recessed drain and are perfect for new drainage systems. They do not require a frame, They sit 'flush' to the surface and don't 'klang' when they're driven over.
To recess the drain at pouring stage, your concreters will need to add a leingth of 30 x 30 timber to the top of their boxing to create the recess for the grate to sit in place once the pour is done, so your top opening will always be the size of the grate, and the body of the drain will be 60mm narrower. ( 30mm deep, 30mm each side. Quieter, neater, & no noisey framework )

A-200-R 200mm wide and 1.0 in length. Load bars at 30 x 5. Side bars at 30 x 5

A-250-R 250mm wide and 1.0 in length. Load bars at 30 x 5. Side bars at 30 x 5.

A-300-R 300mm wide and 1.0 in length. Load bars at 30 x 5. Side bars at 30 x 5.

We try to keep most of these sizes in stock, but it's always a good idea to ring
or fax an order before you need to pick them up.

If we don't have your size in stock, then there will be a 7 to 10 day leed time.

If you don't see the size you need here, we can custom build it for you.

If you require a size not listed here, drop us a line and we'll discuss your plans

Allow 7 to 10 working days when placing your order.

We will match or beat any written quotes on grates of the same dimension & quality.

Photos by '27-South' Photography.